Floors Articles

CoatingsPro | Coatings Industry Magazine

Coating Failure or Client Flop?

Our procedure under these conditions is to pin the garage above the threshold to minimize contaminate blow-in on a calm day. We then tidied up and departed the site, leaving instructions with the owner to keep vehicles off the floor for three days

CoatingsPro | Coatings Industry Magazine

Power Plant Leaks Are Dust in the Wind

At the Ameren Missouri coal-power plant, the areas that are used to convey coal into furnaces, called tripper rooms, were fraught by a cloud covering. The facility owners at this plant needed to do something about it.

CoatingsPro | Coatings Industry Magazine

Green Light for Car Barn Floor

For the owner of specialty cars in Western Pennsylvania, who wishes to remain unnamed, a barn is used to house his collection — one that perhaps even Jay Leno would be proud of.

CoatingsPro | Coatings Industry Magazine

Performance Testing Electrostatic Discharge Floors

Conductive and static dissipative floorings and coatings are designed to provide protection from electrical charges causing harm to workers or products.

CoatingsPro | Coatings Industry Magazine

Attracting New Lessees With New Floor

It seemed like an easy enough project: Recoat an existing 2,600-square-foot (241.5 m²) pockmarked floor. And indeed it was, except for the extremely stringent codes and directives from the client, a pharmaceutical company that wishes not to be named.

CoatingsPro | Coatings Industry Magazine

Brewing a New Floor in the Midwest

In the Midwest, beer rules. So when a large and popular Midwestern brewery needed a new protective floor coating in one of its production facilities last winter, time was of the essence.

CoatingsPro | Coatings Industry Magazine

On Tap at Brewery: New Floors in 3 Days

This hopping brewery has a super-stylish, 2,000-square-foot (185.8 m²) tasting room where patrons can sample its aroma-driven, flavored-focused craft beers. But in the meantime, they’d need to cook up a newly coated floor for the bottling/canning room!

CoatingsPro | Coatings Industry Magazine

The Events Must Go On: Coating Canadian Venue

According to Jeff Kennedy of Applied Coatings and Restoration, the relatively new building was showing substantial cracking throughout the concrete concourse ring above the arena floor and also in the ticketing and main entrance area. “The concrete deck was extremely cracked; it looked like a road map.

CoatingsPro | Coatings Industry Magazine

Tour-Ready Floor at Meat Production Facility

The floor needed to have high wear resistance, impact resistance, ultraviolet (UV) stability, and thermal shock resistance. It needed to counter pooling water and be nonporous. It was a tall order, and on top of all of that, “in a facility that’s surrounded by glass, it needs to look its best at all time,” Winters elaborated.

CoatingsPro | Coatings Industry Magazine

Car Accident Clean Up on Luxury Hotel Floors

“The accident happened late in the evening, and they were trying to make sure guests were unaware of what happened, so we had to try to get everything put together as quickly as possible,” Dumas said. “The damage was pretty extensive, and everything had to get cleaned up pretty quickly because they had guests that were there.”