According to the U.S. National Transportation Safety Board, observations of pitting corrosion indicated that moisture had settled on the surface. This was likely due to tenting of a spiral-wrap tape coating, located at the gap between a coating and where the weld met the surface.

In this case study, significant corrosion was observed on lines supplying air handling units and swimming pools at a Dubai hotel. According to the client, the chilled water application system was installed three years prior and initially handled by a maintenance contractor before being handed over to the asset owner.

Jon Kopp, owner and operator of Quality Epoxy, explains the strengths and limitations of metallic epoxy floors and what his company has learned after seven years of offering this type of coating solution to clients. Among Kopp’s concerns are a lack of installer knowledge and education.

When Chemcote Specialty Coatings took on a job at an aluminum refinery in Gladstone, Australia, the contractor was tasked with providing a protective system to a newly constructed concrete bund, which surrounded a storage tank containing 98 percent sulfuric acid.

When Corrosion Control Resources, Inc. arrived to refurbish a water pump station near Dallas, they initially expected to hand blast with coal slag before applying new coatings. However, they changed course after unexpectedly discovering the pipe was lined with coal tar enamel, rather than epoxy.

Just as a chain is only as strong as its weakest link, the best coating systems are only as good as the substrate to which they are applied. In this case, a soft joint compound was easy to apply and sand and had a smooth, uniform finish, but it was a poor substrate to apply additional material.

Maguire recently partnered with Sherwin-Williams to recoat the interior of an elevated water storage tank in Hitchcock, Texas. This project was the first time in which the newly NSF 61/600-approved Sherplate 600 potable water epoxy coating was applied since its certification for use on water storage tanks.

Saulnier Floors, Inc. began operations in 1951 as a hardwood flooring specialist near Boston, Mass. While remaining family owned, the company has grown from a two-man shop to what is now the largest flooring company in Boston’s North Shore.

To specify a coatings solution, we considered the owner’s expectation for the finished product, the condition of the existing concrete, and the typical environment created by immersion service in wastewater solutions.

When a Houston-area refiner noticed its acid tank corroding internally due to chemical and environmental attack, a crew at BHI Coatings came in to line the tank while also working on its exterior roof, manway, and nozzle inserts.

After nearly four decades of success as a decorative concrete coatings installer, Clark Branum shares some lessons learned from his career and keys to success in the industry.

AMPP is teaming up with the Master Painters Institute (MPI) for the second annual MPI Commercial Coatings Summit, which unites different areas from across the commercial coatings industry while providing opportunities to get the latest information on current issues.

With a focus on challenges and opportunities in the commercial coatings industry, CoatingsPro Magazine is bringing leaders in the commercial sector together with the 2022 CoatingsPro Contractor Conference.

A $100 million expansion by pharmaceutical manufacturer Arranta Bio required coatings work to protect the facility’s concrete floors.

Effective Jan. 1, 2023, the ANSI/NSF 61 standard is being replaced by ANSI/NSF 600. This change is likely have some effect on nearly all potable water linings installed in the United States. Here’s a look at what this could mean for the industrial coatings and water infrastructure industries.