Tesla NanoCoatings
today announced development of its breakthrough wet-on-wet application process
for Teslan® primer and topcoats as the company strengthens its
leadership in carbon nanotube corrosion protection technology.
Named 2x1 Wet
Edge™, Tesla NanoCoatings’ wet-on-wet process delivers major time and cost
savings along with technologically advanced corrosion protection advantages.
Now, applicators can proceed to Teslan 3000 and 3100 topcoats immediately after
applying Teslan 1101 primer, thus saving 50 percent or more of the time and
money required for conventional three-coat painting.
Tesla NanoCoatings
developed 2x1 Wet Edge for the oil and gas industry and other industries in
harsh, corrosive environments. 2x1 Wet Edge is particularly valuable in
offshore oil and gas surface and subsea operations as well as refineries and
petrochemical plants.
"Our 2x1 Wet
Edge process offers double the corrosion protection at approximately half of
the cost compared to all other products on the market today," said Tesla
NanoCoatings President Todd Hawkins. "As we work with our customers, we
continue to gain more and more understanding about their corrosion challenges.
The advantages of a same-day, two-coat system, compared to the old three-coat
products, are tremendous pluses for those facing the demands of minimal
downtime and reduced maintenance budgets."
Hawkins explained
Teslan 2x1 Wet Edge allows for fast wet-on-wet application of topcoat over
uncured primer.
"Our development team has NACE III, SSPC C1
and C2 and other certifications along with vast experience in the challenges of
growing maintenance backlogs amid reduced resources for the fight against
corrosion. Our knowledge and experience blend with our carbon nanotechnology
formulations to make Teslan 2x1 Wet Edge the best process for today’s harshest,
maintenance-critical corrosive environments," Hawkins said
Work is under way
to educate markets about 2x1 Wet Edge and how it can be deployed for customers’
operations. Tesla NanoCoatings will showcase products and the 2x1 Wet Edge
process at major shows and exhibitions like the Society of Protective
Coatings, National Association of Corrosion Engineers and Offshore
Technology Conference, to name a few, throughout 2016.
For more information:
www.teslanano.com.